Splash Zone Protection of Risers, Hull Piping

Splash Zone Protection of Risers, Hull Piping
8/20/2016 9:38:55 AM

Splash Zone Anticorrosive Systems

 

The best way to protect risers and hull piping from splash zones is by using ThermoTron 350 offshore pipeline coating. ThermoTron is a specially-formulated version of Mark Tool's SPLASHTRON for use in high temperatures. Read on to learn more about how ThermoTron is splash zone coating to protect your risers, hull piping, and insulation for subsea flow-line.

What’s unique about ThermoTron?

ThermoTron is designed to insulate hull piping and risers with internal temperatures up to 350 degrees. Unlike other protective coatings, ThermoTron works well in harsh environments. The flexible system offers protection from seawater, impact, creep, weathering, fungus, and marine life for the life of your subsea installations.

ThermoTron offers excellent thermal insulation properties and both anticorrosive and mechanical protection.

How does ThermoTron insulate?

ThermoTron is made up of three layers vulcanized to the surface of the steel pipe. The first layer is a corrosion coating designed to protect your steel pipe’s surface from chemical attack and cathodic disbondment. The second layer is a bonding layer between this corrosion coating layer and the top coat. The third and final layer is a thermal-insulating and anti-corrosive one-inch layer of ThermoTron technology. Thickness for this final coating layer can vary.

Where can ThermoTron be installed?

In addition to hull piping and risers, ThermoTron 350 is also an excellent insulation for a variety of systems including flow-lines, tie-backs, and spools.

How do I know that ThermoTron is effective?

ThermoTron systems manufacturers have 60 years of experience in this industry. One of the largest oil and gas producers in the Gulf of Mexico has also tested ThermoTron’s effectiveness for two years. ThermoTron has passed the following tests with flying colors:

 

  • End of Life (EOL) testing
  • Exposure tests
  • Hot dry-aging testing
  • Water uptake testing
  • Wet thermal degradation
  • Heat capacity testing
  • Thermal conductivity
  • Oxidation testing
  • High temperature testing up to 525° F
  • Low temperature testing down to 25° F

 

Request A Quote

 

What if I don’t need high-temperature insulation?

 

You can always explore the excellent SPLASHTRON insulation system for structures that reach temperatures up to 200 degrees. SPLASHTRON is a great companion to ThermoTron 350. Coming in thicknesses of quarter-, half-, three-quarters, and one-inch, SPLASHTRON doesn’t require much maintenance, while also providing impact damage resistance, weatherability, and insulation. Like ThermoTron, SPLASHTRON has proven its durability in the Gulf of Mexico for over thirty years.

splash zone protection

SPLASHTRON polychloroprene coating: Data Sheet info

SPLASHTRON coating is often used to insulate pipelines, platform structural members, conventional risers, conductors, riser clamp lining, and J-tube pipelines. SPLASHTRON is particularly well-suited to protecting these platforms from boats, debris, marine life, ultraviolet rays, and erosive sea water. Additionally, SPLASHTRON is flexible so even though it’s permanently bonded to metal surfaces, it won’t ever disband for the life of the platform.

 

If you’re ready to install ThermoTron 350 as your wet insulation system, Mark Tool and Rubber Co, Inc. can help. In addition to making custom cast urethane and rubber molded products, we are the premiere retailer and installer of SPLASHTRON and ThermoTron 350 products in the Gulf Coast and around the world. We build protective splash zone equipment for offshore platforms, and we know ThermoTron 350 and SPLASHTRON can better protect your risers and hull pipers and benefit your business. To learn more, contact us today.




 




Posted by: Mark Tool & Rubber | Submit comment | Tell a friend

Categories:

Categories:
All
 

 

© Copyright 2017, Mark Tool Co, Inc.. All rights reserved.