MBX Bristle Blaster

...Introducing the MBX® Bristle Blaster

PLACE ORDER HERE FOR MBX BRISTLE BLASTER KITS OR REPLACEMENT BELTS

MBX Bristle Blaster in actionAn innovative surface preparation and solution that removes corrosion and generates an anchor profile in a single step.

The bristle blasting process is a new innovation that both removes corrosion and generates an anchor profile by using a specially designed rotary bristle tool. This tool consists of hardened wire bristle tips that are bent forward and dDemo of before and after with MBX Bristle Blasterynamically tuned to a hand-held power tool which operates at approximately 2,500 rpm. The mechanical principles upon which the bristle blasting tool is based are summarized as follows: Bristle tips are designed to strike the corroded surface with kinetic energy that is equivalent to standard processes that use grit blast media. Immediately after the bristle tips strike the corroded steel surface, they retract (i.e., "rebound") from the surface, which results in both corrosion removal and a micro-indentation that exposes fresh surface. Consequently, surfaces that have been treated by the bristle blasting tool have a texture and visual cleanliness that mimics those obtained by traditional grit blasting processes.
 

Understanding 3 key features of the Bristle Blasting Process

Q: What is the Bristle Blasting Process?

A: Bristle Blasting is a new process that uses a specially designed rotary bristle tool for achieving both corrosion removal and an anchor profile.

Q: How does the tool perform blasting operations?

A: The rotating bristles are DYNAMICALLY TUNED to the power tool, which results in impact and immediate retraction of bristle tips from the corroded surface.

Q: How is this process similar to the abrasive grit blasting process?

A: The bristle tips are designed to strike the corroded surface with kinetic energy that is equivalent to grit blast media, thereby generating a texture and visual cleanliness that mimics the grit blasting process.

PNEUMATIC - MBX® Bristle Blaster® Industrial
PART NO SE-667-BMC

CLICK HERE TO ORDER

Pneumatic MBS Bristle Blaster Package

 

Pneumatic drive unit (3500X) with 3,500 RPM / Air Cooling / Noise Reduction Technology / Special Gearing for Increased Torque.

  • Adaptor 11 + 23mm (die cast aluminum)
  • 5 Carbon Steel Bristle Blaster® Belts 11mm (Red)
  • 5 Carbon Steel Bristle Blaster® Belts 23mm (Red)
  • MBX In-Line Air Pressure Regulators 11 + 23mm(incl. couplings & nipple)
  • Dust exhaust system
  • Rigid plastic blow mold storage case




ELECTRIC - MBX® Bristle Blaster® Industrial
PART NO SP-647-BMC

CLICK HERE TO ORDER

Electric MBX Bristle Blaster Package

 

110V Electric drive unit (3200X A) with 3,200 RPM / Special Gearing for Increased Torque

  • Adaptor 23mm (die cast aluminum)
  • 10 Carbon Steel Bristle Blaster®Belts 23mm (Red)
  • Rigid plastic blow mold storage case








   

 

© Copyright 2017, Mark Tool Co, Inc.. All rights reserved.